Have you got a Mac error code like “Sorry, no manipulations with clipboard allowed” in your Mac? It’s not just random software that refuses to work, it’s a problem with your hardware. The problem is down to a part called the PME (stage, perform, exit) and if you are seeing any errors on the screen then you should replace your parts. If you want to know what your problem is then open the console and look at the top of the screen. There will be a list of all the different errors that can be displayed. Make a note of the first number (the error code) that you come across.
Next, you need to test to make sure that everything is working OK. To do this you need to first shut down your computer. Then make sure that your hard drive is powered up. Then remove the power cable and if your Mac came with one make sure you unscrew it from the machine. You can now open it up and check out the slots where you are going to plug in the new parts. If you are replacing a battery to make sure that you unplug it properly otherwise you may find that your Mac has no power source.
The most common cause of this error is actually down to the software of your computer. If you have viruses or spyware then you should try to remove these programs from your system. If they are still there and causing problems, you then need to make sure that you get a reliable virus scanner to find out which ones are causing the problem.
If your problem is down to an incompatible chip then you need to first see if you can identify the chip. If you are able to then you should remove the card and then see if the issue still occurs. If it does then you need to remove and then replace the chip. This is usually quite straightforward and you can usually get this done by visiting your local computer store. They should be able to show you how to do this. Make sure that you read through all the instructions and that you follow them closely.
Another cause of the mac error code – 36 is that your computer has been damaged. In many cases, this can be repaired with a little bit of DIY work. If you’re not too confident or knowledgeable then you should call in a technician to do the repairs for you. This is very easy to do and most stores that sell PCs should be able to assist you with this.
Unfortunately, if you have locked yourself out of your Mac then the only real way of resolving the problem is to reset the board. This is done by pulling apart the mainboard and then putting the new one in. This may sound tricky, but it’s actually quite easy. If you know what to do then it’s nothing like the mac error code – 36 to actually do the job and get into your system again.
Founder of Crunchoid, Spent many years in Business Development and Content Creation. Expert in mobiles and gadgets reviews. Passionate about marketing and technology.